Welded mesh panel systerm
A robust welded mesh panel system used in a variety of applications where high security is not a prime requirement.
This is a fence with very low maintenance costs owing to the strength of the panel and the long life finish.
Mesh pattern: welded mesh with reinforcing folds. Horizontal wires and vertical wires are welded at each intersection
Weld strength: 75% of the minimum tensile strength of the wire
Mesh opening: 200 x 50 mm - 50 x 50 mm in folded areas.
Wire diameter: 4 mm. Also possible, 6 mm diameter, upon request.
Recommended post system
Construction: Rectangular Hollow Section
Post centres: 2520mm approx.
Post Caps: Plastic (welded steel on request)
Baseplates: Not supplied as standard
To 2400mm high: 60mm x 40mm
To 3800mm high: 80mm x 40mm
To 5000mm high: 100mm x 50mm
To 6000mm high: 120mm x 60mm
Baseplates or dowells
Plates for mounting on side of walls
Baseplates holed for fixing to concrete or top of walls.
Cranked or straight extensions for barbed or razor wire
Cranked extensions to receive mesh panels
Doglegged cranks at base to go above walls.
Panels made out of galvanised wires (min. 40 g/m2). An adhesion coating is given for a perfect adhesion with polyester coating (min. 100 micron)
The posts are polyester powder coated with a galvanised substrate in the accordance with Euro norm 10147 (min. 60 micron)
Colour coated black or green
other colours available on request
Specifications can be customized..
With all fencing systems, specific demands are made concerning safety, security and aesthetics. On this page you can select a high security fencing system with suitable specifications.